Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 
Manual Spout Cutting Machine
Some FIBC requires spout holes for discharge of stored material, for this spout hole should be cut in the fabric before stitching the bags.

In our M/C Spout hole of different sizes can be cut in the fabric by the spout dies, which is changeable. M/C is supplied with the different sizes of spout dies based on the customer requirement.



Insulated heater is fixed on the spout die. Temperature is controlled by the PID control provided in the panel. 10 15 pieces of fabric can be cut at a time. Measuring scale is provided for setting the position of the spout hole. Pneumatic cylinders are provided to operate the die.

The delivery time of the semi automatic spout cutting m/c is approximately 30 to 45 days

SALIENT FEATURES :
  • High accuracy.
  • Provided with PID temperature controller.
  • Provided with insulated heaters.
TECHNICAL SPECIFICATION :

PARTICULARS/MODEL AT 50 TS, AT 500 FS, AT3000 WS
Control PID TEMPARATURE CONTROL
Heater Rating 1 K.W 1 Phase AC
Pneumatic pr 10 Bar
Electrical Requirements 220 V, 1 ph, 50 Hz
Required Manpower 1 Worker
Our Products
Automatic Bulk Bag Cleaning Machine
Air is pre filtered and is blown through the bag so that all dust and foreign particles settled in the bag
Strength Checking Machine
This M/C will be having the high-resolution microprocessor controller and load cell.
Auto Handle Wrapping Machine
This machine is used to wrap a fabric (max. 30cm width) around one or both handles of the 1-2 loop
Bulk Bag Hydraulic Pallet & Bale Press
Our hydraulic palletizing press is specially designed for packingon the pallets as well as in
Bulk Bag Fabric Cutting Machine
Once you set the desired cut length the operation runs automatically till it reaches the programmed
Bulk Bag Fiexo Printing Machine
Usually all FIBC requires printing because many companies require their logo or company name to
Manual Spout Cutting Machine
Hole of different sizes can be cut in the fabric by the spout dies, which is changeable.
Read More
Call Us On